Hikvision HD Kamera DS-2CD2132F-I

Hikvision HD Kamera DS-2CD2132F-I

Image Sensor: | 1/3" Progressive Scan CMOS
Min. Illumination: | Color: 0.19 lux @ ƒ/2.0
B/W: 0 lux with IR
Lens: | Fixed, 4 mm @ ƒ/2.0 (2.8 mm, 6 mm, 12 mm option)
Horizontal angle of view: 86° (2.8 mm), 70° (4 mm), 43.3 (6 mm), 20.6° (12 mm)
Lens Mount: | M12
Adjustment Range: | Pan: 0° to 355°/tilt: 0° to 75°/rotate: 0° to 355°
Day& Night: | IR cut filter with auto switch
Wide Dynamic Range: | Digital WDR
Digital noise reduction: | 3D DNR
Compression Standard
Video Compression: | H.264/MJPEG
Video bit rate: | 32Kbps~12Mbps
Dual Stream: | Yes
Image
Max. Image Resolution: | 2048×1536
Frame Rate: | 20 fps (2048 x 1536), 30 fps (1920 × 1080), (1280 x 720)
Image Settings: | Rotate mode, Saturation, Brightness, Contrast adjustable by client software or web browser
BLC: | Yes, zone configurable
ROI: | Supported
3D DNR: | Supported
Network
Network Storage: | Built-in Micro SD/SDHC/SDXC slot, up to 128G, NAS(NFS, SMB/CIFS)
Alarm Trigger: | Line Crossing, Intrusion Detection, Motion detection, Dynamic analysis, Tampering alarm, Network disconnect , IP address conflict, Storage exception
Protocols: | TCP/IP,ICMP,HTTP,HTTPS,FTP,DHCP,DNS,DDNS,RTP,RTSP,RTCP,
PPPoE,NTP,UPnP,SMTP,SNMP,IGMP,802.1X,QoS,IPv6,Bonjour
Security: | User Authentication, Watermark, IP address filtering, Anonymous access
System Compatibility: | ONVIF, PSIA, CGI, ISAPI
Interface
Communication Interface: | 1 RJ45 10M / 100M Ethernet interface
Smart Feature-set
Line Crossing Detection: | Cross a pre-defined virtual line
Intrusion Detection: | Enter and loiter in a pre-defined virtual region
General
Operating Conditions: | -30 °C ~ 60 °C (-22 °F ~ 140 °F)
Humidity 95% or less (non-condensing)
Power Supply: | 12 VDC ± 10%, PoE (802.3af)
Power Consumption: | Max. 5W
Impact Protection: | IEC60068-2-75Eh, 50J; EN50102, IK10
Weather Proof: | IP66
IR Range: | 30 meters
Dimensions: | Φ111 mm × 82 mm (4.4" × 3.2")

Weight: | 500 g (1.1 lbs.)